[. . . ] To avoid personal injury and damage to the appliance, NEVER insert or place your hands or foreign objects into the loading shaft or in the mixer. Only exchange accessories when the drive has come to a complete standstill. After being switched off, the drive continues to run for a short time!The appliance is intended for the processing of foodstuffs in private-domestic quantities and intended only for use in private houselholds, in enclosed spaces protected from the elements. [. . . ] Press the unlocking button f down and raise the swivel arm h a little. Press the unlocking button f down and bring the swivel arm h into operating position 5 (see chapter "Operating positions"). Turn the rotary switch g to P and hold it firmly until the drive motor j comes to a standstill (Fig. Press the unlocking button f down and raise the swivel arm h a little. Press the unlocking button f down and bring the swivel arm h into operating position 4 (see chapter "Operating positions"). Working with the food processor Note: Ensure that on the swivel arm h neither the kneading hooks q, the whisk e nor the mixing beater w are attached. Proceed as follows to prepare the appliance for operation with the food processor u: · Press the unlocking button f down and bring the swivel arm h into operating position 4 (see chapter "Operating positions") (Fig ). Press the unlocking button f down and bring the swivel arm h into operating position 1 (see chapter "Operating positions"). Insert the food processor u into the drive opening (The "dot" marking on the food processor u to the "arrow" marking on the swivel arm h) and then turn it clockwise as far as it will go (The "lock" marking on the food processor onto the "arrow" marking on the swivel arm h). Depending on the task to be performed, place the cutting s, rasping o or rubbing i disc onto the drive shaft a of the food processor. Place the lid with stodger d onto the food processor u and latch it down. To avoid personal injury and damage to the appliance, NEVER insert or place your hands or foreign objects into the loading shaft. After being switched off, the drive motor j continues to run for a short time. The appliance may only be used when the drive openings not being utilised are covered with drive protection lids. In cases of malfunction switch the appliance off and remove the plug from the wall socket, this will avoid an unintentional switching-on of the appliance. Disassemble the food processor u and clean all parts (see chapter , , Cleaning and care"). Position the lid with funnel and then press it firmly so that the lid locks into place. In cases of malfunction switch the appliance off and remove the plug from the wall socket, this will avoid an unintentional switching-on of the appliance. refilling with ingredients · Turn the appliance off with the rotary switch g. Remove the funnel and slowly refill with solids through the refill opening or · Refill with fluid ingredients by means of the trichter. [. . . ] The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. In the event of a warranty claim, please make contact by telephone with our Service Department. The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. [. . . ]